Class I Division 1 vs Division 2 Hoists: Start With Your Area Classification
Updated: Oct 30
If you run a plant in the Saskatoon area or elsewhere in Saskatchewan where flammable gases or vapours can appear, hoist selection is not a preference call. Class I means those gases or vapours may be present in enough quantity to create an ignitable atmosphere. Division 1 and Division 2 describe how often that atmosphere is expected — and that answer comes from your facility’s area-classification study, not from picking a “better” hoist on a quote sheet.
SafeLift Crane Aid (A Division of Venter Cranes), based in Langham, SK, serving Saskatoon and Saskatchewan, helps oil & gas, chemical, mining, potash, and related sites match the documented Class and Division to the right hazardous-location hoist — including R&M Materials Handling Spacemaster® EX equipment for Class I, Division 1 and Division 2.
What “Class I” means
A Class I hazardous location is an area where flammable gases or vapours may be present in concentrations that can ignite. Typical industry contexts include chemical processing, oil and gas, paint and coatings, wastewater treatment, pharmaceuticals, fuel storage, and certain manufacturing lines.
In those areas, electrical and mechanical equipment — including hoists — must be selected so it does not become an ignition source. Depending on the classification, that can mean CSA C/US Class/Division–rated components, suitable enclosures, spark-resistant options, and other features called out by the applicable codes and your site engineer.
Division 1: hazard present in normal operation
Division 1 applies where flammable gases or vapours may be present under normal operating conditions. The hazardous atmosphere is not a remote “what if”; it is expected as part of day-to-day work, frequent maintenance, or process conditions.
Examples of environments that may be evaluated as Division 1 (always confirm with your site’s study) include:
Areas near open mixing tanks with flammable solvents
Locations where flammable liquids are transferred or dispensed in the open
Certain chemical processing zones
Spaces immediately around equipment that releases vapour during normal production
For Class I, Division 1, equipment such as the R&M Spacemaster EX Division 1 hoist is built for that duty. On SafeLift’s Hazardous Location Cranes page you’ll see how Div 1 configurations differ in practice — for example different hoisting and travelling motors, a larger control panel, armoured motor cables, intrinsically safe control and limit-switch circuits with barrier relays, and stainless steel data and warning plates — with CSA C/US approval for the listed groups and temperature class.
Division 2: hazard only under abnormal conditions
Division 2 is still a hazardous location. Flammable gases or vapours are not normally present in ignitable concentrations, but they could appear if something goes wrong — a leak, rupture, ventilation failure, or process upset.
Examples that may fall under Division 2 (again, only your classification study decides) include:
Areas adjacent to Division 1 zones
Storage of sealed flammable-liquid containers
Locations near closed piping that could leak
Spaces where ventilation normally keeps vapours under control, but a failure could change that
The Spacemaster EX Division 2 hoist and related explosion-proof crane kits cover Class I, Division 2 for the groups and temperature class listed on our hazardous-location page, with CSA C/US approval and spark-resistant wire rope as standard on those packages.
Classification is not a shopping preference
The useful question is not “Do I want a Division 1 hoist or a Division 2 hoist?” It is: What Class and Division (and groups / temperature class) does the area classification study assign to the location where this hoist will ru
That study looks at the materials present, how they can be released, and how often an ignitable atmosphere is likely. Facilities often work with their safety standards, internal experts, and local authorities having jurisdiction. SafeLift — like any responsible equipment partner — can help align a hoist and crane package with the documented requirement. We do not invent the classification for you.
Canadian sites sometimes also see Zone language (or Demag ATEX Zone equipment) on drawings. Where your engineer or inspector requires CSA C/US Class/Division approval, Spacemaster EX is usually the route we discuss. If your project is specified to Zones instead, tell us that up front so we can confirm the right approval path before quoting. Details and FAQ live on Hazardous Location Cranes
How SafeLift helps Saskatchewan and Saskatoon-area sites
From our base in Langham (physical office 109 Railway Street, Langham SK; postal P.O. Box 94, Langham SK S0K 2L0), we support hazardous-location lifting across Saskatchewan and Northern Manitoba — including sites in and around Saskatoon.
Bring us:
Your documented Class / Division (and groups / T-class if known)
Capacity, span, lift, duty, and voltage
Whether you need a hoist only, a modular crane kit, or help planning a full hazardous-location crane
We’ll help match that package — including R&M Spacemaster EX Division 1 or Division 2 options where they fit — and we can support ongoing overhead crane inspection and crane & hoist repair so the equipment stays safe and serviceable after install.
Next step
If you have an area classification drawing or a short description of where the hoist will sit, send it to sales@ventercranes.com or call +1 (306) 374-5476. We’ll help you confirm the right Class I Division 1 or Division 2 path for your Saskatoon-area or Saskatchewan site before anyone orders the wrong hoist.






Comments