Overhead Crane & Hoist Repair in Saskatchewan
Electrical, mechanical and control repairs for overhead cranes, monorails and hoists
SafeLift Crane Aid repairs overhead cranes, monorails and hoists across Saskatchewan, including Saskatoon, Regina and southern SK. We're based in Langham, near Saskatoon. Our factory-trained technicians troubleshoot mechanical, electrical and control system failures on-site, and we use trusted OEM parts whenever possible. We work around your schedule to keep downtime low, and we get your crane back to safe, reliable operation.
Electrical & control repairs
When a crane won't run, or runs wrong, our technicians track down the fault on-site. We troubleshoot electrical and control system failures, test contactor resistances and limit switches against manufacturer standards, and inspect and tighten wiring connections. On chain hoists and wire rope hoists we repair pendants, controls and limit switches, and we supply electrification parts and controllers. For radio remote controls, we stock Magnetek Flex and SAGA systems and handle spare transmitters, repairs and programming from our Langham, SK shop. See Remote Controls.
Mechanical repairs: brakes, gearboxes, wire rope & chain
Worn brakes, ropes and chains are where lifting safety is won or lost. We open, inspect and service brakes, check brake pad thickness, and adjust and reset brakes to manufacturer tolerances. We check hooks, wire ropes, load chains and safety devices for wear and damage, and replace worn parts. For chain hoist repair we work on brakes, slip clutches, load chains and limit switches. For wire rope hoist repair we cover ropes, hooks and brakes, and we source gearboxes, load chains and wear parts through our crane parts supply. We also check welds, bolts and fittings, and we tighten and adjust as we go.
Our Safety Commitment
At SafeLift Crane Aid, safety is non-negotiable. As an ISNetworld-registered contractor and SECOR-certified company, we adhere to the highest safety management standards in our industry.
Every repair, inspection and maintenance service is performed with a focus on protecting your people, your assets, and your production environment.
Our certifications reflect not only compliance, but a deep commitment to continuous improvement and workplace safety.
Repairs for all makes of cranes & hoists
We're the authorized service provider for Demag and R&M in Saskatchewan, with factory-trained technicians. But our crane repair in Saskatoon and across the province isn't limited to those two brands. We repair cranes, monorails and hoists from all makes, whether they're single girder, double girder or underslung. Through our supply chain we can source parts for many other brands, including obscure or discontinued ones. Our technicians help identify the correct part, so older equipment can keep working safely.
When your crane goes down, every minute counts.
24/7 breakdown service
SafeLift Crane Aid offers 24/7 emergency breakdown support, day, night, weekend or holiday. Our technicians are equipped to troubleshoot mechanical, electrical and control system failures on-site, with access to OEM parts from Demag, R&M and other leading brands. Our priority is to restore safe operation and keep your business moving. For hoist repair in Saskatoon or a crane breakdown anywhere in Saskatchewan, call 306-374-5476.
Crane modernization & upgrades
Sometimes the best repair is an upgrade.
We carry out electrical, mechanical and control upgrades to bring older equipment up to current standards. That can mean a new Demag or R&M hoist on your existing crane, new electrification and controls, or a radio remote control. For customers building their own bridges, we supply complete R&M and Demag crane kits with end trucks, hoists, electrification and controls. After repairs or modifications, we can carry out load testing to CSA B167-26 with our WaterWeights® test bags and supply a certificate of load test.
Common questions about our repair service
Do you repair cranes and hoists that aren't Demag or R&M?
Yes. We're the authorized service provider for Demag and R&M, and we also repair overhead cranes, monorails and hoists from all makes. We can source parts for many other brands, including obscure or discontinued ones.
Do you offer 24/7 emergency crane repair?
Yes. Our 24/7 breakdown service runs day, night, weekend and holiday. Call 306-374-5476 and our technicians will troubleshoot mechanical, electrical and control system failures on-site.
Does my crane need a load test after a repair?
Under CSA B167-26 7.3.1, load tests are generally not necessary following basic maintenance and repairs. After repair or replacement of critical components, the load test may be limited to the functions affected, as determined by an engineer or other competent person. We carry out load testing with WaterWeights® test bags.
Can you fix problems during an inspection?
Yes. Our inspections go beyond a checklist. Where possible, our technicians correct issues on the spot, such as adjusting brakes, tightening wiring connections and bolts, and resetting settings to manufacturer tolerances.
What areas do you serve for crane repair?
We're based at 109 Railway Street in Langham, SK, near Saskatoon. We provide overhead crane repair across Saskatchewan, including Saskatoon, Regina and southern SK.
What customers say
Matt
“Very knowledgeable, good communication, great experience. For every challenge and emergency, Venter has delivered results. The process is straightforward, and Venter provides great feedback to help determine immediate repairs required vs long-term repairs that might affect availability of the crane. First company that I’ve worked with that really knows the cranes inside and out. After inspection we know the true condition of our cranes and what work needs to be completed for reliable operation.
— Matt, Project Manager, Potash Operations
Logan
“Working with Venter Cranes feels reliable, trustworthy and fair. Positive changes are noticed. Equipment inspections typically find small issues before they become large. When repair work is needed, it is completed correctly and in a timely manner. Very few if any call backs are required once work is completed.”
— Logan, Industrial Repair Foreman, Saskatoon
Mark
“Venter does their best to react as quickly as possible—especially when a crane is out of service, which is very important to our business. The process is very smooth: Venter says what they’re going to do, when they’ll arrive, and they do what they say. Since choosing Venter as our preferred supplier, we have less downtime. They are dependable and always respond as quickly as possible to our concerns.”
— Mark, Facility Maintenance Manager, Saskatoon
Jag
“One of the best companies I have had the pleasure of working with. Excellent communication, great follow ups, extensive technical knowledge, and skills from your techs and just amazing how your guys explain the issues, potential solutions. Couldn’t have asked for a better partner for our needs. Smooth process. All it takes is one text, call, or email to Calum or Brad and I can be assured that I will be taken care of without having to call a second time. I don’t have to worry about anything, you guys send out a reminder about our yearly inspections and once you guys have fixed an issue; I never had to worry about it reoccurring a second time. Overall, you guys are very good at what you do, and I believe where you set yourself apart from others is the care you show and due diligence you do. You and your company give us a peace of mind with how we are treated, we feel that you have our best interests in mind every time we deal with you.“
— Jag, Steel Processing Facility Manager, Saskatoon